PN/PN coupler

With the PN/PN Coupler, a simple and uncomplicated connection of two separate
PROFINET networks is possible. The PN/PN Coupler enables data transmission
between two PROFINET controllers. A PROFINET IO device is on both PROFINET
network sides.
Received input data on one of the network sides is made available as output data
to the other network side. The IO data transfer takes place live and as quickly as
possible without additional handling blocks.
The maximum size of the transmitted IO data is 1024 bytes. Up to 16 slots for IO
modules of 1 byte and up to 128 bytes are available.
The incorporation into the PLC engineering tool is made possible by a GSDML fi le;
special confi guration software isn?t necessary.

  • Very compact design for DIN rail mounting
  • Exchange of up to 1024 bytes I/O data
  • Up to 16 slots for IO modules of 1 byte and up to 128 bytes are available
  • Redundant power supply
  • Galvanic separation of the networks
  • No influencing of the opposite side in the event of bus system failure
  • Own PROFINET IO device on both PROFINET network sides - No communication between PROFINET networks possible
  • Configuration only with GSDML file; no additional software necessary
  • PROFINET transmission rates of 100 Mbps
PROFINET Interface:
Number2 with 2 ports each
ProtocolPROFINET IO as defined in IEC 61158-6-10
Transmission rate100 Mbps full duplex
Connection4x RJ45, integrated switch
FeaturesMedia Redundancy Protocol (MRP), automatic addressing, topology detection (LLDP, DCP), diagnosis alarm
Status indicator9 LEDs function status, 8 LEDs Ethernet status
Voltage supply24 V DC (18 ... 28 V DC)
Current drawmax. 210 mA
Ambient conditions
Ambient temperature0 °C to 60 °C
Transport and storage temperature-20 °C to 80 °C
Protection ratingIP 20
CertificationsCE
RoHSYes
REACHYes

Description

Order number

PN/PN coupler V2700-158-3PN02
PN/PN coupler700-158-3PN01

Related products