Gateway PROFIBUS DP to Ethernet
Gateway PROFIBUS DP to Ethernet
€308,00
In stock – ready to ship!
netTAP 50 connects to communication networks and acts as a Gateway for simple conversions between Ethernet/IP, PROFINET or ModbusTCP (1-port) and one fieldbus protocol or one serial automation protocol as well as between one fieldbus protocol and one serial automation protocol.
netTAP 50 supports Slave-to-Slave- and Slave-to-Master-conversions.
As a master, netTAP 50 provides only one single slave device with the full master function. This makes it easy to integrate a single field device into any higher-level network.
The design of the netTAP 50 convinces by its compact hardware and is reduced to the basic requirements of a protocol converter.
The converter is directed to market segments for which the factor costs has priority. This makes the netTAP 50 an attractively priced and universally applicable gateway that offers a wide variety of conversion options.
NT 50-DP-EN supports the following protocols:
- EtherNet/IP Adapter
- Open Modbus/TCP Client
- Open Modbus/TCP Server
- PROFIBUS DP Slave
- PROFINET IO-Device
- PROFIBUS DP Master
- EtherNet/IP Scanner
- PROFINET IO-Controller
- Integrates a PROFIBUS DP into an Ethernet network, and vice versa
- Supports Ethernet/IP, PROFINET and ModbusTCP
- Short I/O data conversion time lower than 20 ms
- Extremely space-saving compact design
- Loadable Firmware for flexible use of other conversions
- With diagnosis and configuration interface via Ethernet
| Communication controller | Communication controller | netX 50 | |
| Integrated Memory | RAM | 8 MB SDRAM | |
| FLASH | 4 MB serial Flash | ||
| Power supply | Supply voltage | 24 V ± 6 V DC | |
| Current consumption at 24 V (typically) | 72 mA / 150 mA (with short circuit at the output of PROFIBUS) | ||
| Typical power consumption | 1,8W | ||
| Communication interface 1 | Communication interface | PROFIBUS DP | |
| Interface type | RS-485, optically isolated | ||
| Connector type | D-Sub female, 9-pin | ||
| Communication interface 2 | Communication interface | Ethernet | |
| Interface type | 100 BASE-TX or 10 BASE-T, isolated | ||
| Connector type | 1 * RJ45 | ||
| Permitted ambient conditions | Ambient temperature (operation) | 0 … +60 °C | |
| Relative humidity (operation) | no condensation allowed | ||
| Device | Dimensions (L x W x H) | 100 x 26 x 66 mm (without connector) | |
| Weight | appr. 80 g | ||
| Degree of protection | IP 20 | ||
| Mounting type | on DIN rail EN 60715 | ||
| Configuration | Configuration software | SYCON.net | |
Description |
Order number |
| NT 50-DP-EN - Gateway PROFIBUS DP to Ethernet | 1758.110 |
| netTAP-50_Datasheet_05-2020_GB.pdf | Versie: 05-2020 |